Premium Water Level Meter - ATEX Approved
Can be used for static and drawdown levels
Yellow polyethylene tape
Fixed Probe
lengths available up to 600m
dipperT2 is certified to ATEx, IECEx, CSA and UL Standards
ATEX
QPS23ATEX5003X
II 1G Ex ia IIB T3 Ga
Ta for probe: -45°C to +135°
Ta for reel : -45°°C to +55°C
North America
c-QPS-us LR3030 North American
Class I, Division 1, Groups CD, T3
Ex ia IIB T3 Ga
Class I, Zone 0, AEx ia IIB T3 Ga
IECEx
ECEx QPS 23.0008X
Ex ia IIB T3 Ga
The dipper-T2 is a premium water level meter made from the highest quality materials. This low cost unit is perfectly suited to a wide range of project and budgets, offering a rugged and durable solution for every project. The meter is manufactured with a Yellow polyethylene tape, which incorporates Kevlar for reinforcement. Tapes lengths are available from 22 m to 600m
The dipper-T2 is a rugged and dependable water level meter made from high quality materials, easy to use for a wide variety of applications. The dipper-T2 is capable of measuring both static and falling head levels. Static mode is used for measuring the depth of water in wells, boreholes and standpipes. DrawDown mode is used for measuring falling water levels during purging, well development and for low flow sampling; helping to protect your pump from damage caused by dry running.
Included:
• Premium Stainless Steel Polyethylene Coated Tape
• 5/8” (15.9mm) Water Level Probe (IP68) w/ holder
• Electronic Panel with audio and visual signals (Fully Encapsulated to IP65)
• Sensitivity dial to tune out cascading water
• Vinyl, ergonomic holding grip
• 9V Battery
• Padded Storage/Carrying Case
