Fluidwell F110 Flow Rate Indicator/Totaliser with Outputs|Intrinsically Safe, ATEX, EEx ia

Fluidwell F110-P

Hazardous Area certified EX ia
Flow Rate, Total, Re-set Total
Pulse Output and 4-20mA Output
Field Mount IP67 or Panel Mount IP65
Battery or 12/24V DC
Pulse Input 

Features

Analog and pulse outputs.

Displays total and flow rate simultaneously.

Large digit selection for flow rate or total.

Flow rate: seven 17mm (0.67") or 8mm (0.31") digits.

Total - resettable: seven 17mm (0.67") digits.

Accumulated total - not resettable: eleven 8mm (0.31") digits.

Separate engineering units for flow rate and total on the display.

Remote control input to reset total or to lock the "clear total" button.

LED backlight.

Auto backup of settings and running totals in EEPROM memory.

Ambient temperature: -40°C to +80°C (-40°F to 176°F).

Various accessories are available for this product.

The F-Series is so rugged, even a truck can stand on it!

Applications

The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, salty atmospheres and temperatures between -40°C up to +80°C (-40°F up to 176°F).

Liquid flow measurement where re-transmission of the flow rate and/or totalizer functions or serial communication is required.

Power Supply

Long life Lithium battery.

4 – 20mA Loop-powered.

8 – 24V AC/DC.

115 – 230V AC.

Basic: 8 - 30V DC.

Sensor Supply

3.2, 8.2, 12, 24V DC.

Flowmeter Inputs

Pulse type inputs:

Reed-switch, open collector, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.

(0)4 – 20mA.

Status Inputs

Remote control: external reset for clearing total or to disable manual clearing through the keypad.

Pulse Outputs

Function: Scaled pulse output according to accumulated total (e.g. a pulse every 3.25 gallons).

Max. frequency: 500Hz.

Adjustable pulse length from 0.001 sec. to 9.999 seconds.

Type: One passive NPN transistor, active PNP transistor or isolated electro-mechanical relay.

Alarm Outputs

None.

Analog Outputs

Function: Re-transmitting the flow rate - the output can be scaled to any range (e.g. 200 L/min to 1200 L/min).

Type: One passive isolated, floating or loop powered 4 – 20mA output or one active (0)4 – 20mA or 0 – 10V DC output.

Intrinsically Safe

ATEX:

 II 1 G Ex ia IIB/IIC T4 Ga

 II 1 D Ex ia IIIC T100 °C Da

IECEx:

 Ex ia IIC/IIB T4 Ga

 Ex ia IIIC T100 °C Da

Explosion Proof

ATEX:

 II 2 G / Ex d IIB T5 Gb

 II 2 D / Ex t IIIB T100°C Db

Communication

Function: All process data and settings can be read and modified through the communication link.
Protocol: Modbus ASCII / RTU.
Interface: RS232 / RS485 2-wire or 4-wire / TTL.
– HART communication is available with the F018 Flow rate Monitor / Totalizer.