Portable Water Samplers

 

Bell Environmental offers a wide selection of portable wastewater samplers for a range of water sampling applications such as industrial effluent and surface water monitoring applications. The automatic water sampler we offer can be configured for different power supply option such as battery, mains power, and even solar power.

 

Typically the portable water samplers are available in two main configurations – single bottle or multiple bottle options, your selection will normally be based on your monitoring requirements. A single bottle configuration, normally collected over 24 hours, will provide a good representation of the water quality conditions for that period. If however your sampling requirements need you to monitor for peak events, a multiple bottle sampler is likely to be the better option.  

 

Another factor to consider is the way in which you are looking to collect water samples. In most case this can be done as a time based sampling or as a trigger based sampling. When undertaking time based sampling, the user will program the automatic water sampler to take a predefined sample volume, based on a time interval. If however you are looking to take samples based on an event, for example high pH, you can remotely trigger the sample to only take a sample when these conditions are present. To perform trigger based sampling you would require an external signal from a water quality meter, flow meter or rain gauge.

 

 

♦ Battery and mains powered options

♦ Single and multi-bottle options

♦ Bottle material options – plastic / glass

♦ Peristaltic and vacuum pump options

♦ Input options – Analog / digital / SDI-12